EBY: Using remanufactured cartridge

  Hey all❤,

   My friend have a Brother printer , and he was wondering how safe it is to use remanufacture ink cartridge? Is it safe to use any non-official/original cartridge? Does it clog the ink jet head using the remanufacture cartridge long terms?
   If you want to know this issue too,I can answer the problem with you.

   There is a difference between remanufacture and compatible cartridges. The remanufacture cartridges for this printer are OEM Brother that have been refilled, and the chip on them has been reset to retain all OEM information (ie. ink level). The compatible cartridges, are made by another company (not Brother) are filled and have no chip included. You have to remove the original Canon chip, and attach it to the compatible cartridge in order to use it. The ink level will have to be disabled in order to print.
    Also, as for it being safe to use anything other than Original Brother ink? Yes it is, but you must be sure the ink is of the highest quality, there are some bad inks out there, and those will without a doubt ruin a print head.
    On the compatibility of ink cartridges,now I am using the latest EBY brand, I am feeling pretty good.
    Hope I can solve  your question~☺☺
For any question or suggestion leave a comment❤❤



评论

发表评论

the hot blogger

toner cartridge issue

图片
Someone chatting me to help him,    he asked : I just replaced toner with a new toner cartridge. Printer works but still shows error message to replace toner. Could this be because I just opened and installed the starter cartridge that came with the printer? When I set the printer up I installed a new high yield cartridge. What can I do? I have unplugged the printer, rebooted the PC. taken the cartridge back out and put it back in several times. I did shake the cartridge side to side and I moved the cleaner for the wire on the drum. The answer:   This is part drum reset but as long as you follow the steps correctly it will clear the message of *Replace toner* (Be aware of step 5) Let me know how you get on. 1. On the printer, open the front toner compartment door. 2. The Printer display will read, “Front cover open.” 3. Press the “Clear” button. 4. Printer will beep and the display should read, “Replace Drum?” 5. This is the tricky part, ignore the replace...
Read more blog »

The printer goes offline and won't come back on/wake up

Hey all ☺ , That's some printer's issue and solution. Replace question:     My Brother MFC-L2720DW continually goes offline and won't come back on/wake up. It's extremely frustrating! Does anyone have any advice on how to solve this, please? It's connected to my PC via USB and I'm running Windows 10 64bit. Solution:   These settings are for setting up your wireless (or wired) printer to: · Stay connected to your router · Fix printer ‘offline’ status · Wake from sleep mode · Keep all wireless devices better connected · May speed up wireless printing While DHCP is convenient, devices such as printers (wired and wireless) should always be assigned a static (fixed) IP address manually to avoid conflicts on your wireless network and must be outside the DHCP range of the router. After setting the static IP, the computer must be updated under Printer Properties/Ports to show a Standard TCP/IP port with the printers IP address.  1. Set a st...
Read more blog »

Printer Preferences & Defaults

Printer Preferences & Defaults Admin Default Settings Printer preference changes made from Devices & Printers, becomes your system “Default”. If we select 3 copies as “Default”, then computer will print three copies for future print jobs. Consequently, our Default is probably always set to just One copy. Navigate as follows: Start -> Devices & Printers -> Right Click Printer Icon -> Select preferences -> Select # Copies Any other options selected here will become the new default settings and will be applicable to new print jobs. End User Settings You can also select printer preferences from whatever application you may be using (WORD, Word Pad, Browser, etc) and select three copies. However this will be a one time selection for this one print job. The printer will then automatically revert back to Admin default setting of only one copy for the next print job. This is true for the other options selected in an application (i.e. black only or two sided p...
Read more blog »